Category Archives: Trucks & Trailers

How to Keep Your Trailer Warm in Winter?

When buying trailers in Canada, you must consider that your electricity bill is bound to shoot up once winter comes around. Buying a very expensive trailer to take care of the windy nights is not always the solution. A few tricks and tips to manage the heat better will allow you to lower your electricity bill.

Tips to Keeping Your Trailer Warm in Winter

The following pointers will allow you to keep your trailer warm even in winters:

  1. As soon as you buy a trailer in Canada, ensure that the insulation is in place. This is probably the most important step to successful and low cost heating of a trailer. Holes in the ceiling and poor/ old insulation will not be able to contain the heat for too long. Hence, you will require a higher amount as well as a continuous source of heat to maintain a warm temperature within the trailer.
  2. As an extension to the insulation of a trailer, the rubber seals and gaskets around windows should be checked to ensure there are no leakages. Maintenance, repair, and replacement, if needed should be performed immediately.
  3. If there is a draft in your trailer, consider sealing it with silicone rubber or spray foam insulation. This will keep cold air from entering your trailer and hot air from leaving it.

Quick Fix: If you are at a campsite and don’t have the time or resources to fix the problem, consider using painter’s tape. Similar to masking tape, painter’s tape helps in securing the edge of a window or shutting off the source of a draft. The difference lies in the fact that this tape does not leave a sticky residue.

Maintaining your trailer to ensure that it gives you and your family the best possible experience will help you enjoy a higher return on your investment. A few smart preventive steps can save you a fortune. However, this is a continuous process. Whether you’re looking to keep your trailer warm in winter or cool in summer, these tips and trick for trailer maintenance will help you effectively utilize your trailer.

What Are the Benefits of Using a Container Unloader?

Container unloaders, used to empty out the contents of shipping containers are perfect for industrial use. This helps in saving time, eliminating waste, and reducing human effort. It provides extremely efficient results. In case, you were considering splurging on tilting trailers, take container unloaders into consideration as well. Container unloaders can be used with regular shipping containers. Hence, one container unloader will do the job of multiple tilting trailers.

5 Main Benefits of Using a Container Unloader

If your business requires you to regularly unload the contents of a shipping container, you can benefit from using a container unloader. Here’s why:

  1. Time Taken

The overall time taken to unload a shipping container is much lower when using a container unloader.

  1. Labor Cost

Since the entire operation of unloading takes place with the help of a remote control, the labor cost is minimal. The number of people required to handle the equipment also reduces.

  1. Contamination

Since containers can be unloaded directly into a silo, the risk of contamination is greatly reduced.

  1. Safety

The human interaction with the container and the unloader is reduced to the distance of operating the remote. Hence, the operator is far away in case of any mishap.

  1. Convenience & Storage

Containers can be stored on the unloader and unloaded over a period of time.

The automation of container unloaders allows precise control over the movements of the container. It helps minimize errors, since the unloading angle and speed can be determined by the controller. Since these unloaders are compatible with all containers of a certain size, they can be used multiple times over. There is no need to get in separate accessories to make this product compatible with your existing containers. Attach it, and you are good to go!

5 Tips to Buying the Right Used Tractor

A tractor is a machine that pays high returns, if chosen right. Choosing the right model and make is important. However, don’t forget the other important details needed to make the right purchase. Here, are listed some pointers to help you make a smart decision when buying used farm equipment.

5 Points to Consider When Buying a Used Tractor buy used tractors The following features should be taken into consideration when purchasing a used tractor:

  1. Tires

The tires are an important aspect of the functioning of the tractor. Measure the tread depth and check it against the manufacturer’s guidelines. Changing the tires of a tractor costs a lot. Hence, steps should be taken to determine the life left in the tires.

  1. Body

The condition of the body speaks of the previous owner’s manner of usage. If a tractor looks cared for, it probably was.

  1. Articulation

The articulation is an important part of the machine. Check for the following: a) Presence of metal shards is an indication of improper maintenance and wearing of parts. b) When driving the tractor forward and in reverse, if you hear a knocking sound, may be the transmission has slipped. c) If the steering wheel sticks or is loose, the problems could arise from improper/ lack of greasing. Problems with the hydraulic cylinders could cause this issue too.

  1. Engine

What goes on under the hood will determine how your machine runs. Let the machine idle, if there is any leakage or smoke visible when you lift the hood, there is probably a serious problem you need to consider. You should also check the condition of the various components like the air filter, hydraulics, fuel lines, etc.

  1. Cab

Check the cab for signs of wear. You should check the displays, electronic components, guidance systems, etc. It will give you an idea of how frequently the tractor was maintained. Look for the number of miles covered. Check if the engine and exterior of the machine have been maintained according to the operation time. When purchasing used tractors, request for all information from the seller. This information should include maintenance logs and all supporting documentation. This will help you in gauging the condition of the machine and its parts. Complete transparency during the entire process is vital for mutual profitability.

Looking to Sell Off Used Trailers Online? Read On.

Buying and selling of used industrial equipment and machineries are very much in vogue as the practice comes with several benefits and financial relief for both the sellers and buyers. In case you are one of them who are seeking information on how to sell off used trailers to potential buyers without much hassle, the solution lies in online classified websites. Selling off used trailers would not only help the seller to organize his finances but would also help him to acquire new ones according to their timely requirements. For contractors who work on varied projects and contracts, this process brings in financial comfort and convenience. However, knowing about certain aspects always help in getting the best out of selling used trailers.


What would you look for in an online classified website while selling off used trailers?

With the advancement of online interaction between traders, customers and clients, the classified websites have witnessed a tremendous boon. The rise of online platform has benefitted several buyers and sellers who make mutual profits through selling and buying used materials. Whether used or newly-bought, when it comes to industrial equipment’s like trailers, the relevance, price and operational value matter more than anything else.

Nevertheless, a seller should check out few details about the online classified website before listing the used trailers.

  • An online classified website should be registered and the website should provide a comprehensive platform to bring the sellers and buyers together in the same plane.
  • The website of the classified portal should possess clarity, navigability, cohesiveness and complete information regarding the listed products.
  • Make sure that they deal with only registered and authentic sellers as this guarantees fair deal for both the sellers and buyers.
  • The online portal should provide enough space for the sellers to describe their trailers’ or equipment’s’ condition, features, specifications along with apt and latest pictures.
  • It is important to opt for a website that provides complete and clear steps and instructions for sellers about how to list their products under particular categories.
  • Make sure that your trailer gets listed under the correct product category and ensure that you are given access to options like “edit product information” and “upload recent photos

Selling off used trailers has become a simplified task when you have the assistance of reliable and reputed online classified websites like Waste Equipment. We provide you complete ease and convenience with professional instructions along with the opportunity to make the best out of the deal.

Requirements to be Considered Before Buying used Trailers

Buying trailers in Canada is no more a task; especially with so many reliable online classifieds doing the rounds. However, as a sensible customer, you should do your best to get your money’s worth when it comes to buying a used trailer. All you require is a little education, apt information and certain knowledge about the product to be bought. It has been found by experts that customers tend to pay little attention to research and to make the matter worse they lack the flair to evaluate a trailer. Certain factors are advised to be considered and few questions should be able to guide your purchasing decision. These questions are:

online classifieds for used trailers

Buy or Sell Your Used Trailers With Online Classified in Canada

  • For how long are you planning to own the trailer?
  • How much pressure or load the trailer is going to carry?
  • Are you going to borrow the trailer to others for hauling activities?
  • Would you be able to spend for the maintenance and management of the trailer?

Apart from these questions, some of the aspects should be able to act a reference guide before buying a used trailer in Canada through online classifieds:

Frame/Build: Ideally trailers are made of one of the 3 shapes of steel namely Box Tubing, Channel Iron and Angle Iron. Of them, Box Tubing has the best properties that resist it from twisting and flexing than any other form of steel.
Tongue Length: The tongue length of a trailer determines its stability as the longer it is, the easier it is for the trailer to be steered by the towing vehicle. Hence, longer tongue length indicates towards less weight on your car and more on the trailer and it also makes for easier backing.
Coupler: Make sure that the coupler provided with the trailer is not worn out or damaged or rusted. It should be known that it can be expensive to replace a damaged coupler as it is usually welded. Hence make sure not to buy a twisted, bent or sloppy coupler.
Taillights: It is preferable to opt for LED taillights than incandescent as the former gives brighter illumination in half the power and has a longer life than the later. LED taillights are also maintenance free.
Wiring: Ensure that the wires and grommets are at perfect shape and at their right places and order as that will keep short circuit from happening.

Besides these aspects, a customer should also inspect other components before buying a used trailer in Canada, such as the axle, wheels and tires, fenders, welds, finishing, and most importantly the warranty documents and other paperwork for the product like bill of sale, statement of origin etc.